Endotronic E-Smog Spy

Advantages at a glance:

- more sensitive and higher signal strength compared to the old spy
- Measuring range 50 Hz to 8 GHz

- quick analysis of environmental pollution electrosmog via loudspeaker

Technical data:

Measuring range NF: 50 Hz - 250 kHz; 7 V/m to 300 V/m

Measuring range HF: 250 kHz - 8 GHz; 0.18 μW/m² to 720,000.00 μW/m²

Depending on the antenna and its position, deviations are possible in all measurements possible.

Operating voltage: 9 - 12 V DC. indoor+

The level jump from one LED to the next corresponds to approx. 6 db

Antennas:

The Endotron HF+NF measuring principle consists of a broadband, linear technology that works evenly and over large frequency ranges.

A rough frequency selection is only made by plugging in of different antennas, which can be used in different frequency ranges

are capable of resonance.

 

HF:

1. telescopic antenna extended (approx.50 MHz-200 MHz)

FM, DAB+, DVBT (lower range);

at approx. 25 cm (approx. 200 MHz - 600 MHz)

BOS, Tetra, aeronautical radio, DVBT (upper range)

2. flat antenna: suitable for WLAN (2.1 to approx.6 GHz), Bluetooth, microwave ovens

3. mobile phone antenna (approx.600 MHz - 2.1 GHz):

UMTS, cordless DECT phones, smartphones,

generally mobile phones, possibly radar signals,

Microwave ovens

 

LF:

Telescopic antenna extended: 50 Hz (alternating current),

Switching power supplies, LEDs, TV, displays,

LW radio, radio clocks, pasture fences, time signal transmitters,

Sferics (natural climate) in outdoor areas