• EMFields Acoustimeter

EMFields Acoustimeter

$376.99

The Acoustimeter has been designed to enable you to make a quick and informed judgement regarding the level and nature of microwave signals in your environment.

Quantity
In Stock

The Acoustimeter

The Acoustimeter is our most versatile microwave detector. It presents RF measurements as an audio signal, with LEDs and accurate readings on an LCD screen. It also measures both the peak and average readings at the same time. It covers the spectrum from TETRA all the way up to and beyond the 5.6 GHz WiFi and WiMax frequencies, and is sensitive down to 0.02 V/m, making it a suitable instrument for those with severe electrosensitivity.

Further Information

The Acoustimeter has been designed to enable you to make a quick and informed judgement regarding the level and nature of microwave signals in your environment. It is a broadband instrument that accurately measures the totality of the radiation in the range 200 MHz to about 8000 MHz (8 GHz), which covers the frequencies used by most modern communication systems encountered in our everyday environment. The Acoustimeter was designed using the experience gained from many years of practical RF and microwave measurements.

Usage

The readings are shown on both an LCD display and two series of graduated LED lights. The LEDs update rapidly, and allow you to quickly gauge the levels in an area and find any hot-spots. The LCD display offers high accuracy with a lower update speed, giving you time to take note of the readings.
It also has a speaker (and audio output socket for headphones or to feed to an audio recorder), allowing you to determine, with a small amount of practice, what type of device is creating the levels that are present. Sound samples are available on this page to help you identify what kind of signal your Acoustimeter is measuring. The sounds made by different transmitters can change with time, so these are meant as a rough guide only. If you are subject to a number of sources of RF, the sounds may intermingle and be less easily identified.
In areas where there is virtually no modulated microwave radiation (below the level of 0.02 V/m that the Acoustimeter is designed to detect), it is possible, with the volume turned fully up, to hear faintly some background clicking. This is from internal workings of the Acoustimeter and is not related to any external signal, and is therefore of no concern.

Technical specifications

  • Two line LCD displaying actual levels:
    • — Peak exposure levels in V/m
    • — Peak hold levels in V/m
    • — Average exposure levels in µW/m2
  • Two lines of fast LEDS displaying showing:
    • — Peak exposure levels in V/m
    • — Average exposure levels in µW/m2
  • Measurement range: 200 – 8 000 MHz ±6 dB ±0.02 V/m
  • Sensitivity (Peak Display): 0.02 V/m – 6.00 V/m
  • Sensitivity (Average Display): 1 µW/m2 – 100 000 µW/m2
  • Pulsing signal may be heard through the internal speaker
  • Power source: 2x AA Alkaline or Rechargeable (1.2 – 1.5V)
  • Power draw: 105 mA at 3 V
  • Battery life: 20 hours
    • — Typically 15 hours on two new 1500 mAhr AA alkaline cells and
    • — Typically 25 hours on two charged 2700 mAhr NIMH rechargeable cells
  • Size (mm): 190 x 102 x 33 (LxWxD)
  • Weight: 280g, excluding batteries
emf-emfAM10
3 Items

Specific References