Fauser Isotropic, potential-free electric field probe EPL3

Tax included

The EPL3 sensor enables the potential-free and isotropic measurement of alternating electric fields with the FM10 field meter. It measures the individual field components with three pairs of field plates and calculates the total field strength.

The measuring signal is transmitted to the FM10 field meter via optical fibre.

FM10 firmware version 1.22 or higher is required for operation.

approx. 2 weeks delivery time

  • Isotropic and potential-free measurement of alternating electric fields
  • including 2.5m fibre optic cable
  • For connection to the FM10 field meter
  • Measured values easily readable on the FM10 field meter
  • Display of the total field strength and the three field components
  • Analogue signals are available at the output of the FM10LS field meter for spectrum analysis
  • All filter and display functions of the FM10 can be used
  • Recording the field strengths with the FM10L field meter
  • Supplied with support rod and tripod holder
  • excellent price/performance ratio

Technical data

Sensor   Field plate pairs
Measuring ranges 0..2000,0 V/m
Resolution 0,1 V/m
Frequency range 16 Hz..400 kHz
Measurement uncertainty < 5 % [50 Hz] ± 3 dB
Display functions total field strength X-, Y-, Z-component
Power supply   
EPL3 probe 2 x rechargeable battery NiMH 4000 mAh
EPL3 receiver via FM10 field meter

EPL3 probe 100 x 126 x 103 mm
EPL3 receiver 129 x 40 x 25 mm
EPL3 probe
400 g
EPL3 receiver 64 g
Working temperature 0..+40°C
Humidity range 10..70 % (non-condensing)

Subject to technical changes

Scope of delivery

Isotropic potential-free electric field probe EPL3, 2.5 m fibre optic cable, 50 cm holding rod, charger


Specific References


Anleitung Fauser IPES ESP3

Download (129.33k)